[Equest-users] DWG import

[Rob Hudson]

While in the wizard, go back to the first input page and check the box that
says "via coordinates" and then make sure your x and y coordinates are 0 and
that your second shell is being specified as "immediately above" your first
shell.

Hope this helps,

Rob

On Fri, Jun 10, 2011 at 10:38 AM, Brad Donohue <brad.donohue at me.com> wrote:

> Hello,
>
> I am a new user to eQUEST and I am having some trouble getting CAD files to
> work properly. I Assign the new files to sit on top of the previous floor
> but when I save the outline it moves out of place. Any ideas? I have tried
> DXF and re-drawing some of the drawings but with no success.
>
> Thanks,
>
> Brad
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Rob Hudson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110610/28c31676/attachment.htm>