[Equest-users] Changing building orientation in 'Detail Design'

[Huseyin Koksal]

Thanks a lot Nick.

Regards,

Huseyin

From: Nick Caton [mailto:ncaton at smithboucher.com]
Sent: Friday, June 03, 2011 1:19 PM
To: Huseyin Koksal; equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] Changing building orientation in 'Detail Design'

Hi Huseyin!

The answer is yes:  Building Shell tab --> Building Data (in component tree) --> Azimuth

For 90.1 and similar models, this variable is also easily set up as 3 parametric runs to get 90, 180 and 270 degree rotations.

~Nick

[cid:image001.jpg at 01CC21F1.A48953C0]

NICK CATON, P.E.
PROJECT ENGINEER
Smith & Boucher Engineers
25501 west valley parkway
olathe ks 66061
direct 913 344.0036
fax 913 345.0617
www.smithboucher.com

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Huseyin Koksal
Sent: Friday, June 03, 2011 12:10 PM
To: 'equest-users at lists.onebuilding.org'
Subject: [Equest-users] Changing building orientation in 'Detail Design'

Hi All,

Would someone tell me if the orientation of the building can be changed in the detailed design (since there is no going back to Wizards) . For example,  from East facing to North facing? Thanks

Regards,

Huseyin

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110603/8afff996/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1459 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110603/8afff996/attachment.jpg>