[Equest-users] Heat Recovery question

[Bishop, Bill]

Paul,

If you right-click and select "Edit/View User Default" it shows values
for four of the five ERV types. For heat pipes, there is no default
value, so you need to pull one out of your, um, hat.

Bill

 

From: Paul Diglio [mailto:paul.diglio at sbcglobal.net] 
Sent: Friday, June 03, 2011 11:58 AM
To: Bishop, Bill; BLafley; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Heat Recovery question

 

I have the same question as Bill Lafley.

Once you enter the type of ERV, the eQuest defaults disappear.  The
program then asks for the inputs.

Paul Diglio

 

 

________________________________

From: "Bishop, Bill" <wbishop at pathfinder-ea.com>
To: BLafley <BLafley at cetonline.org>; equest-users at lists.onebuilding.org
Sent: Fri, June 3, 2011 11:21:07 AM
Subject: Re: [Equest-users] Heat Recovery question

Bill,

 

I would just use the eQUEST defaults for whichever ERV-RECOVER-TYPE is
applicable. The variables I would focus on are the sensible, and if
appropriate, latent effectiveness, as well as the ERV-OA-FLOW and
ERV-EXH-FLOW. The effectiveness and/or efficiency are provided by the
HRV/ERV manufacturer. Note that "efficiency" and "effectiveness" mean
different things, and if you enter the efficiency in eQUEST instead of
sensible/latent effectiveness you will underestimate the energy savings.
See HVI (Home Ventilation Institute), Section 3, page two:

http://www.hvi.org/resourcelibrary/proddirectory.html

 

The manufacturer might have values for the air film resistance fraction
and exponent, but don't count on it. These values modify the
effectiveness based on hourly OA and exhaust airflows, so they won't
even matter unless the hourly airflows through the ERV/HRV change
significantly.

 

Regards,

Bill

 

 

 

-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of BLafley
Sent: Thursday, June 02, 2011 4:59 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Heat Recovery question

 

Hello,

 

Can someone tell me where I get the following values and/or what are 

reasonable numbers for these inputs?  "HX Air Film Resist."  and "Air 

Film Resist Exp."

 

Thanks,

 

 

-- 

Visit us online! <http://www.cetonline.org>

 

Bill Lafley <mailto:blafley at cetonline.org> | Energy Analyst

Center for EcoTechnology | 320 Riverside Drive - 1A | Florence MA  01062

413-586-7350 ext. 222 | 413-695-2730 (cell)

www.cetonline.org <http://www.cetonline.org> | Sign up for EcoUpdates! 

<http://www.cetonline.org/Mailist/VR_Signup.php>

 

 

_______________________________________________

Equest-users mailing list

http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org

To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110603/44c278b5/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 20862 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110603/44c278b5/attachment.jpeg>