[Equest-users] Supply air temperature Reset
Hall, Brendan
BHall at karpinskieng.com
Tue Aug 2 06:38:36 PDT 2011
This is from the Energy Trust Oregon training info for use in the
baseline scenario.
Brendan Hall, M.Sc., LEED AP BD+C
Mechanical Engineer
karpinski
ENGINEERING
3135 Euclid Avenue
Cleveland, OH 44115
P 216.391.3700
F 216.391.0108
E bhall at karpinskieng.com
W www.karpinskieng.com <http://www.karpinskieng.com/>
________________________________
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of DongEun
Kim
Sent: Tuesday, August 02, 2011 7:26 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Supply air temperature Reset
All:
App G requires the Baseline modelto have supply temp reset :
"The air temperature for cooling shall be reset higher by 2.3 under the
minimum cooling load conditions"
So, I chose Cool Control to be "Reset" and applied Cool Reset Sch.
But, I am not sure if I heading right direction as I am new to modeling
supply air temperature reset.
Can you please give me some advice on this?
Thank you very much !!
DE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110802/5e7aa5a0/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 134009 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110802/5e7aa5a0/attachment.gif>
More information about the Equest-users
mailing list