[Equest-users] copying files

Nick Caton ncaton at smithboucher.com
Fri Nov 5 07:20:21 PDT 2010


The specific files you may want to save will vary.

 

If you're not sure, my practice is to open the file, then "save as" to
the new directory.  This will place only copies of the files you need to
open the project, and is great way to isolate what's critical.  I keep
my projects backed up by "saving as" to my USB flash drive every so
often.  If I want to open/review a project on there, I first copy the
file directory to the computer (off the flash drive) and open that copy
alone, to avoid the same space/clutter issues on my USB drive.

 

Since 3.64 is relatively new, this might also be a good opportunity to
tag your project's directory names with what version of eQuest they were
developed under.  I find issues can ensue if you try to manipulate
models with different versions.

 

~Nick

 

 

 

NICK CATON, E.I.T.

PROJECT ENGINEER

25501 west valley parkway

olathe ks 66061

direct 913 344.0036

fax 913 345.0617

Check out our new web-site @ www.smithboucher.com 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Kelsey
VanTassel
Sent: Friday, November 05, 2010 8:52 AM
To: Wolfe, Brian; Yehuda Israel; 'eQuest'
Cc: 'Bob Frank'; 'Hanan Waizman'; 'Howard Israel, P.E.'
Subject: Re: [Equest-users] copying files

 

Don't forget the .prd file if you have parametric runs set up in
detailed edit mode.

 

Kelsey Van Tassel

Mechanical Engineer | kvantassel at sustaineng.com

608.836.4488 ext. 20 | Fax: 608.836.4477

 

Sustainable Engineering Group

901 Deming Way, Suite 201

Madison, WI 53717

www.sustaineng.com <http://www.sustaineng.com/> 

 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Wolfe,
Brian
Sent: Friday, November 05, 2010 8:51 AM
To: Yehuda Israel; 'eQuest'
Cc: 'Bob Frank'; 'Hanan Waizman'; 'Howard Israel, P.E.'
Subject: Re: [Equest-users] copying files

 

Look for the .inp and .pd2 files.  Those will be the two files needed
for transferring.  Once you've transferred the files to the new project
folder, you will need to open the .pd2 file.  

Good luck.

 

BRIAN J. WOLFE, CDT, LEED AP BD+ C

SUSTAINABLE DESIGN COORDINATOR

HKS, INC.

1919 McKINNEY AVENUE

DALLAS, TX 75201

214.969.5599 ext.3669

bwolfe at hksinc.com

www.hksinc.com

If you are sending file(s) always use my Thru DROPBOX
<https://hks.thruinc.net/drop_box.asp?toemail=bwolfe@hksinc.com> 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Yehuda
Israel
Sent: Friday, November 05, 2010 8:32 AM
To: 'eQuest'
Cc: 'Bob Frank'; 'Hanan Waizman'; 'Howard Israel, P.E.'
Subject: [Equest-users] copying files

 

To all:

 

I want to copy the my eQuest files over my server at work to another
office.  There are so many files that it takes a very long time to copy.
Is it possible for me to copy just a few key files and then the new
computer will recreate the additional files?  If so, which files are the
key ones.

 

Thank you.

 

Yehuda Israel, 

Energy Analyst 

 

New Source Energy Group, Inc.

8 Ellington Way

New Hempstead, NY 10977

Main:    (845) 445-0457

Fax:      (845) 354-6347

www.NewSource-Energy.com

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101105/5128f6fc/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101105/5128f6fc/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1535 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101105/5128f6fc/attachment-0001.jpeg>


More information about the Equest-users mailing list