[Equest-users] UWall Error Using LEED Compliance Ruleset

Pasha Korber-Gonzalez pasha.pkconsulting at gmail.com
Thu Nov 4 09:58:26 PDT 2010


Andy,

according to recent previous posts regarding these compliance errors, this
is something that many of us have encountered, but the developers have
advised that there is not a work-around for the users.  This is a
development issue that they are trying to correct as we speak.

Best bet is to create your baseline manually (as before) until this is fixed
in the program.

Pasha

On Wed, Nov 3, 2010 at 11:26 AM, Andy Harrison <Andy.Harrison at arup.com>wrote:

> Hi All,
>
> I'm getting the attached error using the LEED compliance simulation;
> presumably the ruleset doesn't know what to assign to this particular
> construction element in the baseline building?  Any advice would be much
> appreciated.
>
> Regards,
>
> Andrew
> ____________________________________________________________
> Electronic mail messages entering and leaving Arup  business
> systems are scanned for acceptability of content and viruses
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101104/ee87afd2/attachment.htm>


More information about the Equest-users mailing list