[Equest-users] Airflow through an Enthalpy wheel.

[Bishop, Bill]

Vikram,
 
You can enter it in the Heat Recovery 1 Tab:
 
 
 
I think if you specify the zone OA cfm and the zone exhaust (if any),
the ERV cfm will take care of itself even if you don't enter it
explicitly.
 
Regards,
Bill
 
William Bishop, EIT, BEMP, LEED(r) AP | Pathfinder Engineers &
Architects LLP
Mechanical Engineer
 
134 South Fitzhugh Street
Rochester, NY 14608
T: (585) 325-6004 Ext. 114
F: (585) 325-6005
wbishop at pathfinder-ea.com
www.pathfinder-ea.com
P Please strive to live sustainably.
________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Vikram
Sami
Sent: Friday, March 12, 2010 3:04 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Airflow through an Enthalpy wheel.
 
I'm modeling a lab where general lab exhaust is run through an energy
recovery unit, while fumehood exhaust is exhausted directly.
 
I don't see a spot in eQUEST where you can specify the airflow through
an energy recovery unit. Is it possible?
 
Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 
LORD, AECK & SARGENT ARCHITECTURE
1201 Peachtree Street NE, Suite 300, Atlanta, GA 30361 
Responsive Design * Technological Expertise * Exceptional Service 
Please visit our new website | www.lordaecksargent.com
<file:///\\www.lordaecksargent.com\> 
P Think GREEN before you print.
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100312/94678f48/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 31507 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100312/94678f48/attachment.jpeg>