[Equest-users] How to model a bldg with different roof levels?

[Amandeep Singh]

Hello everyone,

 

I was trying to model a bldg with 50% area at 25 feet high and remaining
area at 10 feet. How can I specify different heights in  the footprint
of this bldg. in eQUEST?  I tried to draw in DD Wizard. First I drew a
footprint with 25-foot height, then I tied to create a new shell with
10-foot height. I wasn't able to put two shells together. Also, I didn't
know how to change exterior walls to interior. 

 

Any help would be appreciated .

 

Regards,

Aman 

 

 

Amandeep Singh
Energy Engineer

8690 Balboa Ave, Suite 100
San Diego, CA 92123-1502
858.634.4729 phone
858.244.1178 fax
www.energycenter.org <http://www.energycenter.org/>  web

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100311/3a7cdf9e/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 8634 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100311/3a7cdf9e/attachment.jpeg>