[Equest-users] Chilled Beams Modeling

[Vikram Sami]

I've done this only once, but here's how I went about it:

 

You model the chilled beam system as an induction unit (assuming it s a
passive chilled beam). You will need to model it's OA from a DOAS
system. Since the chilled beam system itself does not use fan energy you
will need to set your kW/cfm at zero. The fan energy gets captured at
the air handler. Now with the lab I was modeling the chilled beam was
running on 100% OA, so this was a valid approach.

 

 If the chilled beam air handler has recirculation air (return air),
this might not be a valid approach. 

 

 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE



 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Pasha
Korber-Gonzalez
Sent: Tuesday, March 09, 2010 1:29 PM
To: wallie padero
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Chilled Beams Modelling

 

Wallie,

 

I've never tried this method, but I came across this thread yesterday
when I was perusing the archives for other data...let us know if this
approach is successful for your project.

 

http://lists.onebuilding.org/htdig.cgi/equest-users-onebuilding.org/2009
-April/001397.html

 

Pasha

On Tue, Mar 9, 2010 at 7:01 AM, wallie padero <wallie_p at yahoo.com>
wrote:

Hi guys!

Does anyone knows how to model chilled beams in e-quest? What system
should i used?

Thank you so much in advance.
Wallie

 


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100309/530d3643/attachment.htm>