[Equest-users] Exterior Lighting in the Detailed Interface

[Steven Savich]

Gregory,

 

In detailed data edit mode, go to the Utility & Economics tab, select the
electric meter from the component tree.  The exterior lighting load should
be in the direct loads tab of the electric meter properties dialogue box.
You can assign interior and exterior direct loads, schedules, and end uses
from this dialogue box.

 

Steven

 

Steven Savich, LEED AP

Systems West Engineers

411 High Street

Eugene, OR  97401-2427

(541) 342-7210

(541) 342-7220 (fax)

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Gregory
Sarkisian, P.E
Sent: Thursday, March 04, 2010 9:15 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Exterior Lighting in the Detailed Interface

 

I am modleing an existing building and I input the exterior lighting power
density in the wizard. I am now in the detailed interface and can't seem to
locate where this is so I can edit the values. Anybody have an idea where I
can find it?

 

Thanks,

 

Gregory Sarkisian, P.E.



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/789cbd63/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 27225 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/789cbd63/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 15912 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100304/789cbd63/attachment-0001.png>