[Equest-users] Adding components in eQuest's detailed edit mode

[Pasha Korber-Gonzalez]

The fastest way to add your windows and skylights is in the Wizard mode.
It is always a good idea to make sure that you have input your major
building characteristics (i.e. footprint, zoning patterns, windows &
skylights) in the wizard before you switch to ddedit mode.  This is the
approach I use for my projects....I don't switch to ddedit mode until I know
that my windows & elevations look like they should from the arch dwgs.

eQuest has a forward-stepping process to it, and it is not very friendly if
you want to backtrack on your steps...

pkg

On Fri, Jul 30, 2010 at 8:06 AM, Fleming, Joe <joe.fleming at tlc-eng.com>wrote:

>  eQuest Users,
>
> When you are in detailed edit mode, has anyone found a fast way to add an
> array of skylights (or windows)?  Let's say that you want 96 2'x4' skylights
> in a 8x10 array.  Instead of creating 96 skylights and offsetting them one
> at a time is there a faster way to do this?  This could also apply to
> windows or other components. The thermal effects are not of interest here as
> much as the day lighting effects.
>
> (When you use the skylight multiplier Equest warns you that it is
> multiplying the amount of light entering that one window and not spreading
> it around the roof).
>
>
>
> Thank You
>
>
>
> *Joe Fleming*
>
> *E.I., LEED AP BD+C, BEMP*
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100730/2b74bc27/attachment.htm>