[Equest-users] VRV with Variable Exhaust

[Paul Diglio]

Tim:

I am working on a identical renovation project, with the exception that I also have hot water baseboards in the Lab areas.  How did you make out with the BSUG VRV modeling methodology?  I looked it over, but have not dived into it yet.

Did you ever work out how to cycle the VRV cassette fans separately from the MAU fan?  I am using discharge temperature reset on my MAU, it has a steam preheat, reheat and a DX coil.

Thank you,

Paul Diglio, CEM

--- On Tue, 7/20/10, Tim Johnson <timj at ctagroup.com> wrote:

From: Tim Johnson <timj at ctagroup.com>
Subject: [Equest-users] VRV with Variable Exhaust
To: equest-users at lists.onebuilding.org
Date: Tuesday, July 20, 2010, 3:15 PM


 
I am attempting to model a university laboratory building that has a VRV system being used in combination with a variable volume exhaust and makeup air systems controlled by pressure independent valves.  We are doing heat recovery on the exhaust air, so from the archives, I see that the only way to account for that is to specify the exhaust flow as supply air from the makeup air unit that is 100% outside air.  Equest will then balance the supply and exhaust.  This way I can set my schedules to reflect the usage of the spaces and will account for the variable volume exhaust and makeup air.  
The issue becomes the VRV system.  Ideally, the makeup air unit would run separately providing tempered outside air for ventilation and exhaust hoods and the VRV fan coils would cycle on to meet the heating or cooling load.  I am using the VRV modeling methodology discussed at the Oregon BSUG.  Is there a way to get my VRV fans to cycle separately from the exhaust and ventilation systems?
Thanks for the help,
Tim
 







Tim Johnson
Mechanical EIT, LEED-AP  
DIRECT: 208.577.5645  
FAX: 208.343-3531
 
 
 
 
 
CTA, INC  |  WWW.CTAGROUP.COM 
AN INTEGRATED DESIGN FIRM 
1185 W GROVE ST – BOISE , ID 83702 
  
-----Inline Attachment Follows-----

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100729/c8a93333/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/bmp
Size: 17694 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100729/c8a93333/attachment.bin>