[Equest-users] error trying to create a new window in Dedit mode

[Pasha Korber-Gonzalez]

Hi Paul,

Creating a window & specifying/inputing glass performance are two separate
parameters.   I find the easiest way for me to manage input details when I
create new windows is to copy a window on the same wall and then with this
'copied' window I modify the dimensions and x-y coords to where I want the
new window.   This works better for me than saying "create new window".

Then you assign a glass to this window which is where the SC & U values are
specified for the glass properties.   Scroll further down on your component
tree (after constructions) and you will find "glass types" which is where
you can create a new glass type that will be specified with your new window.

hope this helps.
Pasha

On Fri, Jul 23, 2010 at 8:44 AM, Paul Brooks <equestpaul at yahoo.com> wrote:

>  I have graduated to the Detailed edit mode for my model.  I am trying to
> create a new child component (window) for a wall.  I get an error that will
> not let me continue.  I have been trying to modify an existing window, but
> cannot get the screen to let me do what I need, which is to input the SC and
> U value of a window, at this pint I am making a 90.1 complant window.  This
> should not be this hard.
>
> Any suggestions on how to get around this?
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100723/e601bbba/attachment.htm>