[Equest-users] Steam for AHUs

[Sami, Vikram]

A hot-water loop. On the demand side a hot-water loop attaches to heating coils, preheat coils, reheat coils, baseboard heaters, floor panels, supplementary heating loads (from a heat pump), or to process heating loads defined within a space. It may also attach to an absorption chiller. On the supply side this loop attaches to boilers, heat-recovery devices, and/or a hot-water/steam utility.

The hot water loop serves the same function.

Vikram Sami, LEED AP
Sustainable Design Analyst
1382 Peachtree St. NE, Atlanta, GA 30309
t: 404-443-7462    f: 404.892.5823       e: vikram.sami at perkinswill.com   www.perkinswill.com<http://www.perkinswill.com/>
Perkins+Will.  Ideas + buildings that honor the broader goals of society


From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Paul Brooks
Sent: Wednesday, July 21, 2010 5:01 PM
To: eQuest user forum
Subject: [Equest-users] Steam for AHUs

I am Detailed edit mode.  I am a bitconfused at the ability to say that the heat source for an AHU is a steam loop, and I can add a steam meter to a hot water loop, but apparently cannot make a steam loop from the meter to the coil.  Anyone got any ideas on what I am missing in all of this?


This email and any files transmitted with it are confidential and intended solely for the addressee. If you are not the named addressee you should not disseminate, distribute, copy, or alter this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100721/f5ada470/attachment.htm>