[Equest-users] Window operation

[Pasha Korber-Gonzalez]

Yes, the fan energy savings is achieved by the system fans being turned off
when you tell the program that NV strategies are 'turned on'.   and yes, you
are on the right track with the use of the hourly reports too.

pkg

On Wed, Jul 21, 2010 at 8:40 AM, sinan senel <msinansenel at yahoo.com> wrote:

>  Dear Peter and Pasha,
> Thank you for the quick and the useful response.
> Actually, I want to see the effect of natural ventilation on overheating
> hours.
> And the only that I can calculate overheating hours is to check whether
> zone temperatures are over a certain limit by using hourly reports.
> Do you think it would be ok to use NV for this purpose?
> And do I get it right that energy savings in fan energy consumption is due
> to the ourside air supllied to the zone by NV?
> Thanks
>
> Best Regards
> Sinan Senel
>  ------------------------------
> *From:* Pasha Korber-Gonzalez <pasha.pkconsulting at gmail.com>
> *To:* Peter Hillermann <peterh at westallarchitects.com>
> *Cc:* sinan senel <msinansenel at yahoo.com>;
> equest-users at lists.onebuilding.org
> *Sent:* Wed, July 21, 2010 4:11:46 PM
> *Subject:* Re: [Equest-users] Window operation
>
> Yes, in addition to that you need to model/specify your building windows as
> "operable".  If they are specified as a "fixed" window then the simulation
> will not "open" them to the outside air conditions and subsequent wind speed
> from the weather file.
>
> Always when trying to simulate some amount of NV you must have specified
> operable windows & window area separate from your fixed windows and window
> area AND you will have a temp schedule so that the program knows how you
> want it to react.  Also remember that these attempts to represent energy
> savings from operable windows or NV strategies are only static calculations,
> therefore there are no iterations to take advantage of the dynamic
> principals of NV in DOE-2.   AND   this is not a good way to analyze thermal
> comfort of the occupants with NV design strategies.  The only purpose for
> applying this approach in DOE-2 is to minimally represent potential energy
> savings (mostly fan energy) in your whole building analysis.
>
> Better tools (and typically more expensive tools) are available to properly
> analyze the dynamic characteristics of Natural Ventilation strategies &
> occupant thermal comfort, especially if you are trying to do this in
> support/compliance for the LEED credit.  One tool is TAS (thermal analysis
> software), and maybe TRNSYS (I'm not exactly sure of it's capability), and
> of course CFD.
>
> pkg
>
> On Wed, Jul 21, 2010 at 7:53 AM, Peter Hillermann <
> peterh at westallarchitects.com> wrote:
>
>>  Sinan Senel,
>>
>>
>>
>> Under HVAC systems there is an outside air tab with a natural ventilation
>> tab. Use it with a schedule attached to temperature and you should be fine.
>> There is even a textbox that says window probability open.
>>
>>
>>
>> Thanks,
>>
>>
>>
>> *PETER HILLERMANN*
>>
>>
>>
>> peterh at westallarchitects.com
>>
>>
>>
>> *westall*
>>
>> *architects*
>>
>> 3404 pierce drive
>>
>> chamblee, georgia 30341
>>
>>
>>
>> o 770.458.4113
>>
>> f  770.458.5352
>>
>> c 678.898.2936
>>
>>
>>
>> westallarchitects.com
>>
>> [image: e-signature][image: USGBC-Logo]
>>
>>
>>
>>
>>
>>
>>
>> *From:* equest-users-bounces at lists.onebuilding.org [mailto:
>> equest-users-bounces at lists.onebuilding.org] *On Behalf Of *sinan senel
>> *Sent:* Wednesday, July 21, 2010 8:00 AM
>> *To:* equest-users at lists.onebuilding.org
>> *Subject:* [Equest-users] Window operation
>>
>>
>>
>> Dear all,
>> Does any of you know if we can model the exterior windows to be opened
>> based on the zone temperatures?
>> For example I want to operate the exterior windows and open them if zone
>> temperature exceeds
>> 23 degrees and outdoor temperature is higher than 15 degrees.
>> Is it possible?
>>
>> Thank you in advance.
>>
>> Best Regards
>> Sinan Senel
>>
>>
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100721/5818e7a8/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3224 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100721/5818e7a8/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 2436 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100721/5818e7a8/attachment.gif>