[Equest-users] Unmet Hours

[Kelsey VanTassel]

I guess you are right, it just shows the total percentage, but all of the systems do at least show up on one report. I was running a TRACE file so I couldn't double-check and I just remembered wrong, sorry.

Kelsey Van Tassel
Mechanical Engineer | kvantassel at sustaineng.com<mailto:kvantassel at sustaineng.com>
608.836.4488 ext. 20 | Fax: 608.836.4477

Sustainable Engineering Group
901 Deming Way, Suite 201
Madison, WI 53717
www.sustaineng.com<http://www.sustaineng.com/>


From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of M. Shields
Sent: Thursday, July 15, 2010 4:24 PM
To: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Unmet Hours

Maybe I am missing something, but when I click project the Project Totals table does not show the sum of the hours, just a total percentage outside throttling range which is the same as the BEPS/BEPU report, and does not break it out by cooling/heating.  Am I missing something?

Michael Shields

From: Kelsey VanTassel [mailto:KVanTassel at sustaineng.com]
Sent: Thursday, July 15, 2010 3:50 PM
To: M. Shields; equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] Unmet Hours

I like to look under Airside HVAC. Click on the summary tab, then click on "project" in the component tree on the left hand side. It will show you the sum automatically.

Kelsey Van Tassel
Mechanical Engineer | kvantassel at sustaineng.com<mailto:kvantassel at sustaineng.com>
608.836.4488 ext. 20 | Fax: 608.836.4477

Sustainable Engineering Group
901 Deming Way, Suite 201
Madison, WI 53717
www.sustaineng.com<http://www.sustaineng.com/>


From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of M. Shields
Sent: Thursday, July 15, 2010 2:47 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Unmet Hours

Hi All,

I am trying to determine the number of unmet cooling and heating hours for my model.  From what I've read on the BEPU/BEPS reports I can find the % of the hours that the load is unmet, but is there a way to break this out into cooling and heating time?  The other alternative I see is to go through either the SS-F reports, or the Air-Side HVAC section and add up all of the zones unmet heating and cooling hours.  Does anyone know of a better way to determine this?

Thanks,
Michael Shields
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100715/09e51d6a/attachment.htm>