[Equest-users] How to Change the building orientation in detailed mode

[Jeremy McClanathan]

In the Building Shell module, double click on "Building Data" in the component tree, then change the azimuth.

Jeremy

From: Ming Li [mailto:mli at cadworks.net]
Sent: Thursday, July 15, 2010 1:33 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] How to Change the building orientation in detailed mode

Hi All,

I am trying to model a baseline design. I need to simulate the building with its actual orientation and again after rotating the entire building 90, 180, 270 degrees, then averaging the results. I was wondering if I can change the building orientation in detailed mode so that I do not need to go back to Wizard mode. Does anyone know how to do this?

Thanks,

Ming Li, LEED AP


This email message, including any attachments, is for the sole use of the intended recipient and may contain confidential, proprietary, and/or privileged information, as well as content subject to copyright and other intellectual laws.  If you are not the intended recipient, you may not disclose, use, copy, or distribute the email message or its attachments.  If you believe you have received this email message in error, please contact the sender by reply email, immediately delete this email and destroy copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100715/3fb34c0d/attachment.htm>