[Equest-users] Parametric run

[Pasha Korber-Gonzalez]

Yes, similar to the previous suggestions from Carol & John most simulators
will choose to work with two separate model files for thier project
(1-Proposed model & systems, 2-Baseline model & systems) when the proposed
systems differ from the suggested baseline system outlined in App. G.

In some model cases you might actually have the same proposed systems as
suggested in the baseline.  In a case like this consider yourself lucky
because you can then only work in one file and create your alternate model
run using only the parametric inputs.

More often than not however, the App G systems will differ from what is
being proposed for your design and it is more user friendly and less
frustrating to first create your proposed design model and then when you are
ready to work on your baseline case model use the "Save As" approach and go
back into the plant & systems tabs and make the appropriate adjustments from
there.

pkg

On Sun, Jul 11, 2010 at 10:54 PM, sambhav tiwari
<tiwari.sambhav at gmail.com>wrote:

> Hi Equesters,
>                      I had the chilled water system in my proposed
> Case and i tried to change the system from VAV in proposed case to
> Packaged single zone in basline directly through parametric run .
>
> In the parametric run i created the component type as HVAC system and
> there made the basic specification as Packaged single zone system .
> But my parametric run is giving the errors hence not simulating.
>
> Can anyone suggest some help.
>
> Thanks
> Sambhav.
>  _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100712/508af20f/attachment.htm>