[Equest-users] Parametric run

[Carol Gardner]

Sambhav

I don't think this is a good idea. You will have to make many changes in
your baseline to meet the requirements of Appendix G. Just make a copy of
your proposed building model, using Save As, and you are good to go.

Regards,
Carol

On Sun, Jul 11, 2010 at 9:54 PM, sambhav tiwari <tiwari.sambhav at gmail.com>wrote:

> Hi Equesters,
>                      I had the chilled water system in my proposed
> Case and i tried to change the system from VAV in proposed case to
> Packaged single zone in basline directly through parametric run .
>
> In the parametric run i created the component type as HVAC system and
> there made the basic specification as Packaged single zone system .
> But my parametric run is giving the errors hence not simulating.
>
> Can anyone suggest some help.
>
> Thanks
> Sambhav.
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>



-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100712/30a2d162/attachment.htm>