[Equest-users] Properly modeling PTAC and Baseboard system

[Alex Krickx]

Hi everyone,

I have a (hopefully simple) question on how to model a senior living center HVAC system.  Central natural gas boiler provide heating which is delivered through baseboards and cooling is provided by through-wall AC units (one per each apartment).

I've modeled the system as Cooling: DX coils; Heating: None; System Type: PTAC (no heating).  I'm currently in the DD Wizard so on Wizard Screen 6 I've selected Baseboard source as Hot Water Loop.

I'm hoping that someone can confirm this is the correct way to model this system.

Thanks very much.

Regards,
Alex Krickx


Alex Krickx
Building Energy Specialist
[cid:image001.jpg at 01CA9B56.6CAE5EA0]
1250 Elko Dr, Sunnyvale, CA 94089
(t) 408.541.8124

Warning: The information contained in this e-mail may be privileged attorney-client communications or attorney work product and/or proprietary and confidential.  If the reader of this message is not the intended recipient then you have received it in error and any review, distribution or copying of this message is prohibited and you are to notify us immediately by reply e-mail and delete the original message immediately.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100122/dc6517e6/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 5602 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100122/dc6517e6/attachment.jpg>