[Equest-users] Detailed Data Edit: fixing walls, ceilings etc.

Taylor Sharpe newspectrum at gmail.com
Thu Jan 14 16:09:35 PST 2010


Sorry--I forgot to include the screenshot...here it is.

Thanks!
-Taylor Sharpe

On Thu, Jan 14, 2010 at 4:05 PM, Taylor Sharpe <newspectrum at gmail.com> wrote:
> As part of getting to know the program, I have been creating simple
> models with the DD wizard and then switching into DDE mode to make
> adjustments, create components, etc.  At the moment, I am working on
> creating and preparing walls, ceilings, etc.
>
> I have included a screenshot of a current project, in which I adjust
> the top floor of a building to give it a slanted roof: I delete a wall
> on one side and raise the wall on the other side, then assign polygons
> to the other two walls to make them triangular; I then resize and tilt
> the roof to fit onto these other polygons.
>
> The screenshot will make it clear that all of the pieces are not
> personally aligned, but that's only because I haven't done the math to
> place them perfectly.  My question is: once the polygons and the roof
> have been placed, will eQuest automatically "snap" the elements
> together to create a seal?  Is there some process for ceiling two
> polygons together?
>
> Regards,
> -Taylor Sharpe
>



-- 
"America...your machinery is too much for me."

               -Alan Ginsberg, 'America'
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Dancing Tower - DD 3 - 3d-2.jpg
Type: image/jpeg
Size: 328078 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100114/df7cce50/attachment.jpg>


More information about the Equest-users mailing list