[Equest-users] "Purge" function?

[Carol Gardner]

I hold it to be true that someday all of this will be much easier. Soon,
please.

Pasha has the right attitude and I'll add a couple of additional
recommendations: if a dog or cat is available, have it snuggle up next to
you, approach it as a meditation and breathe in and breathe out, use the
opportunity to also rename spaces, thermal zones, etc., to something that
makes sense to you, if you are at home the judicious use of wine or beer may
be appropriate. In summary, look at it as a gift that has been given to you
to go slower. You may as well, and you know it will be worth it in the end.

Keep the faith, Nick!

Mostly seriously,
Carol

On Wed, Apr 28, 2010 at 2:10 PM, Pasha Korber-Gonzalez <
pasha.pkconsulting at gmail.com> wrote:

> I haven't found anything that is efficient.  I usually just sit back, relax
> and start right clicking.... or I just don't bother deleting the
> non-referenced stuff unless it creates an error and forces me too.
>
> pasha
>
> On Wed, Apr 28, 2010 at 10:07 AM, Nick Caton <ncaton at smithboucher.com>wrote:
>
>>  To clarify,
>>
>>
>>
>> I am not asking about purging a CAD reference.
>>
>>
>>
>> I am seeking a means or method to quickly perform conceptually the same
>> “housekeeping” task of removing Constructions/schedules/materials and such
>> from the .inp file that aren’t being used or referenced, without doing so
>> manually in a text editor or rightclick-deleting many items in the
>> interface.
>>
>>
>>
>> ~Nick
>>
>>
>>
>> [image: cid:489575314 at 22072009-0ABB]**
>>
>> * *
>>
>> *NICK CATON, E.I.T.***
>>
>> PROJECT ENGINEER
>>
>> 25501 west valley parkway
>>
>> olathe ks 66061
>>
>> direct 913 344.0036
>>
>> fax 913 345.0617
>>
>> *Check out our new web-site @ *www.smithboucher.com* *
>>
>>
>>
>> *From:* equest-users-bounces at lists.onebuilding.org [mailto:
>> equest-users-bounces at lists.onebuilding.org] *On Behalf Of *Nick Caton
>> *Sent:* Wednesday, April 28, 2010 9:23 AM
>>
>> *To:* equest-users at lists.onebuilding.org
>> *Subject:* [Equest-users] "Purge" function?
>>
>>
>>
>> Is there any means/method to “purge” an eQuest/DOE2 model to automate
>> removal of any defined constructions/materials/schedules that are not being
>> referenced elsewhere?
>>
>>
>>
>> ~Nick
>>
>>
>>
>> [image: cid:489575314 at 22072009-0ABB]**
>>
>> * *
>>
>> *NICK CATON, E.I.T.***
>>
>> PROJECT ENGINEER
>>
>> 25501 west valley parkway
>>
>> olathe ks 66061
>>
>> direct 913 344.0036
>>
>> fax 913 345.0617
>>
>> *Check out our new web-site @ *www.smithboucher.com* *
>>
>>
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100429/d6e0d62b/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100429/d6e0d62b/attachment.jpeg>