[Equest-users] Thermostat Setting

[Howe, Timothy]

Just re-name the file "not-a-top-secret-nuclear-facility.pd2".  Should be all good.

 

 

Timothy Howe, MS, LEED® AP
Mechanical Engineer
Stantec

2060 Brighton-Henrietta Town Line Road
Rochester NY 14623-2792
Ph:   (585) 413-5347
Fx:   (585) 272-1814
Cell: (585) 330-8681

stantec.com <http://www.stantec.com>  

 

The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.

 

ü Please consider the environment before printing this email. 

 

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Eric O'Neill
Sent: Thursday, April 22, 2010 1:18 PM
To: Susan F
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Thermostat Setting

 

Can't you just remove the sensitive project information from the files? A text editor should allow you to find any "incriminating evidence" and you can switch the weather file location so we won't even know where in the world it's located :-) Unless you're modeling the pentagon, in which case I'll quiet down.

 

And I doubt this is it, but you might want to double check your header in the hourly report to make sure you're not looking at just the heating setpoint (see attached pg.2 and below). The space isn't being cooled at all, correct?

 

 

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Susan F
Sent: Thursday, April 22, 2010 11:47 AM
To: Carol Gardner
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Thermostat Setting

 

Unfortunately due to the sensitive nature of the project I cannot send the files.  I have checked and my heating/cooling schedules are assigned to the right locations.  

Could it be related to the design temperatures I have indicated for each zone?  The tstat schedules are as I have stated below but I have the design temperatures at 74 cooling and 72 heating.  The load temperature (in the space definition) is 70.  My throttling range is 2.  Would any of this cause problems?

On Thu, Apr 22, 2010 at 11:50 AM, Carol Gardner <cmg750 at gmail.com> wrote:

Susan,

While in detailed data edit go onto one of your thermal zone spreadsheets to look at your schedules. You will be able to see them easily from there. Make sure you haven't accidentally put your heating schedule in where your cooling schedule should be. If this doesn't work zip up your .inp and .pd2 files and send them to us.

Good luck,
Carol

On Thu, Apr 22, 2010 at 6:11 AM, Susan F <modelsenergy at gmail.com> wrote:

	I have a model that does not seem to be switching the thermostat between heating and cooling.  When I output the hourly data for the Zone Thermostat Setting it seems to always be the heating setpoints (70 occupied and 64 unoccupied).  Any idea why this wouldn't be changing over to cooling setpoints (75 occupied and 82 unoccupied) during the warmer months?
	
	Thanks in advance.  

	_______________________________________________
	Equest-users mailing list
	http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
	To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100422/4c6645fc/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 15391 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100422/4c6645fc/attachment.png>