[Equest-users] Calculation Temperature

[Carol Gardner]

Amanda,

It is your space temperature and is used to calculate loads. If you double
click on any space you will see what you either you entered or allowed to
default. You can also bring up your spreadsheet when you are on a space and
then see all of them at once.

Carol



On Fri, Apr 16, 2010 at 3:05 PM, Amanda Berens <amandaberens at gmail.com>wrote:

> Hi All,
>
> Does anyone know the definition of "Calculation Temperature" as shown on
> Report LV-C?  It is not my set point temperature nor is it my heating or
> cooling design temperature.  It does not seem to be a number that I manually
> input into the model.
>
> Thanks for any help you can provide!
>
> Amanda Berens
> LEED A.P.
> E.I.T.
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100418/e64c85f4/attachment.htm>