[Equest-users] Elevator Shafts

James Hansen JHANSEN at ghtltd.com
Fri Apr 16 07:23:53 PDT 2010


Why model it as a separate shell?  I usually just create an elevator
space on each floor (as well as stair spaces), and set their zones as
unconditioned, no lighting, no power, etc.

 

If you wanted to model the impact that this unconditioned shaft has on
the adjacent spaces (if the shaft has a roof exposure, garage exposure,
etc), you could just keep the lowest elevator space you create, erase
all of the other ones, set that lowest space height to the height of the
building, and give it a roof...you'd then also have to make sure your
interior walls are all correct.  Seems like a waste of time to me for
what you'll eventually see as an impact, but if you want a true model,
that seems the easiest.  Creating a separate shell for the elevators
seems like more work than you need...

 

GHT Limited
James Hansen, PE, LEED AP

Senior Associate

1010 N. Glebe Rd, Suite 200

Arlington, VA  22201-4749

703-338-5754 (Cell)

703-243-1200 (Office)

703-276-1376 (Fax)

www.ghtltd.com <http://www.ghtltd.com/> 

 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of
Anand.Varahala at us.schneider-electric.com
Sent: Friday, April 16, 2010 10:11 AM
To: cmg750 at gmail.com; John Aulbach
Cc: equest-users at lists.onebuilding.org
Subject: [Equest-users] Elevator Shafts

 


Morning Everyone! 

A quick question. What is the best way to model elevator shafts in a
high-rise building (35 floors with 9 elevators in the center-part of the
building)? Would it be a single stand-alone shell and the rest of the
building wrapped around it? Or is there another (better) way? 

Thanks.
________________________________________________________________________
_____________ 

Anand Varahala, LEED(r) AP  |   Schneider Electric   |  Energy Solutions
|   Application Engineer 
Phone: +1 (919) 227-3920  |   Fax: +1 (859) 962-4561  |   Mobile: +1
(919) 720-0769 
Email: Anand.Varahala at us.schneider-electric.com
<mailto:Anand.Varahala at us.schneider-electric.com>   |   Site:
www.schneider-electric.us <http://www.schneider-electric.us/>   |
Address: 4917 Waters Edge Dr, Suite 270, Raleigh NC 27606 USA
P Please consider the environment before printing this e-mail 


The information contained in this communication is confidential, may be privileged, and is intended only for the use of the addressee.  It is the property of GHT Limited.  Unauthorized use, disclosure or copying of this communication or any part thereof is strictly prohibited and may be unlawful.  If you have received this communication in error, please notify me immediately by return e-mail or by e-mail to ght at ghtltd.com, and destroy this communication and all copies thereof, including all attachments.  Thank you.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100416/a0820ad4/attachment.htm>


More information about the Equest-users mailing list