[Equest-users] QC error

[Li, Lan]

When I was at eQuest seminar this year, we were told the QC function was
still under development. It was not recommend using it as right now the
requirements is too stringent. 

 

Thanks!

 

Lan

 

________________________________

From: tsea2005 [mailto:tsea2005 at 163.com] 
Sent: Tuesday, April 13, 2010 11:13 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] QC error

 

Hello All,

 there are some errors at the details of the  QC report during my
simulation.

 Here is a summary of the errors.  If anyone has seen this before and
may have ideas about what's causing it, I'd really appreciate the help.
And I want to know what is the QC's function and how to avoid the Qc
errors.

 Many thanks,

 Tsea

1)Zones Outside Throttling Range

Insufficient Cooling

Zone 'EL1 Core Zn (G.C6)' under cooled for 162 hours (error if > 150)

Zone 'EL1 Core Zn (G.C7)' under cooled for 47 hours

Zone 'EL1 Core Zn (G.C8)' under cooled for 162 hours (error if > 150)

Zone 'EL1 Core Zn (G.C9)' under cooled for 47 hours

 

2)Interior Surfaces

Underground Surfaces

SPACE 'EL1 Core Spc (G.C5)':

Underground Surface conduction may account for an undue proportion of
total Heat/Cool load (Warning: 0.90 <=

Ratio <= 1)

Underground Surface conduction heat load to total heat load ratio = 0.85

Underground Surface conduction sensible cooling load to total sensible
cooling load ratio = 0.93

 

3)Infiltration

SPACE 'EL1 Core Spc (M.C15)':

Infiltration may account for an undue proportion of total Heat/Cool load
(Warning: 0.90 <= Ratio <= 1)

Infiltration heat load to total heat load ratio = 1.00

Infiltration sensible cooling load to total sensible cooling load ratio
= 1.00

 

 

2010-04-14 

________________________________

tsea2005 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100414/d5dff2aa/attachment.htm>