[Equest-users] Ventilation

[Carol Gardner]

Mike,

Zip up your .inp and .pd2 files and send them to everyone.

Carol

On Tue, Apr 13, 2010 at 12:13 PM, Murray, Michael <mmurray at murphy-stl.com>wrote:

>  Dear equest users,
>
>
>
> I’ve been trying to calculate savings for converting a 100% outside air
> ventilation system to a 90% ducted return/ 10% outside air economized unit.
> I set up the model using detailed mode, which I believe is the only way I
> can specify directly the percentage of outside air. I’m having trouble
> setting up the parametric runs to show this change, as so far electrical
> consumption for ventilation fans has been identical. The unit has DX coils
> for cooling and electric heat, so there should also be some reduction in
> conditioning due to the circulation of air. So far I haven’t seen any
> difference between my two runs. Is it possible I have a scheduling problem?
> Or is it possible that my parametric runs are setup incorrectly? I’m new to
> equest, so any help is appreciated.
>
>
>
> Thanks in advance,
>
> *Mike*
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100413/976fd2a8/attachment.htm>