[Equest-users] Ashrae 62.1

[Wilson, Luke]

Equest users,

I am curious as to how you all deal with ASHRAE 62.1 ventilation requirements in Equest. I looked through the archives, but I didn't see much on the subject. If you use the OA sizing method of "SET-BY-CRITICAL-ZONE" is that enough to satisfy the requirements in 62.1? I have found that getting the correct ventilation rate in energy models makes a big difference and can be a bit difficult at times.

Thanks in advance,

* Please note our new contact information and operating entity *

Luke Wilson, EIT, LEED AP BD+C


3005 Carrington Mill Blvd., Suite 550, Morrisville, NC 27560
t: 919.597.7931    f: 919.433.5301    e: lwilson at integral-group.net<mailto:lwilson at integral-group.net>    www.integral-group.net<http://www.integral-group.net/>

Integral Group.  Deep green engineering.

This email and any files transmitted with it are confidential and intended solely for the addressee.  If you are not the named addressee you should not disseminate, distribute, copy, or alter this email.

Please consider the environment before printing this email.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100412/4ef35b9c/attachment.htm>