[Equest-users] Fixing Unmet Load Hours

[Caleb Bulow]

I'm not super familiar with e-Quest, but if you bring up the properties
of some component, then right-click as if to bring up the help.  Select
'Tutorials and Reference', then 'Detailed Simulation Reports Summary
(pdf)'.  I've found this document to be helpful.

Good luck.

Caleb B. 

  PRAIRIE ENGINEERING, P.C.

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of reniel
barroso
Sent: Saturday, April 10, 2010 9:24 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Fixing Unmet Load Hours

 

To eQuest Users,

 

Good Day!

 

We are generating unsual results with one of our model with regards to
unmet load hours.

 

Is it possible that in proposed design, all spaces (not even one space
was below 100) to have 500+ unmet load hours each?

All the required inputs as per equipment schedule are already encoded in
the model.

Seeing the sizes of the equipment in an engineering point of view were
oversized by around 10% to 15%.

Even the baseline (though a little lower than the proposed) has
unaccpetable unmet load hours.

 

This could have been discussed before, but looking for this discussion
in the forum with the right information we need may take a longer time.

 

What are the usual/S.O.P procedures in counter-checking the model that
we need to do to bring down the unmet load hours to acceptable level?

What parameters do we need to check and correct?

 

We are in the final stage of our energy model, immediate and workable
solutions that will be provided will be greatly appreciated.

 

Thanks in advance.

 

 

Reniel

 


 

 

________________________________

New Email addresses available on Yahoo!
<http://sg.rd.yahoo.com/aa/mail/domainchoice/mail/signature/*http:/mail.
promotions.yahoo.com/newdomains/aa/> 
Get the Email name you've always wanted on the new @ymail and
@rocketmail.
Hurry before someone else does!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100410/c770a2b4/attachment.htm>