[Equest-users] Non-rectangular building shade

Umesh Atre umesh at innovativedesign.net
Fri Apr 9 09:22:25 PDT 2010


Richard,
I wonder if you could create an additional exterior wall and define that
as a shading surface. Then you could reference polygons of your choice.
You might have to define the wall w zero gains/losses as it would
otherwise get added up under conduction. Another option could be to
create 
an unconditioned dummy zone just for the purpose of creating these
additional shading surfaces?
I have not tried this so do not know if it would work. Just thinking..
 
 
 

________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Richard
Williams
Sent: Friday, April 09, 2010 6:03 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Non-rectangular building shade



Hello

 

Is it possible to use non-rectangular polygons as shade? If so how do I
do this?

 

Any suggestions much appreciated.

 

Regards

 

Richard

____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100409/3c97ef79/attachment.htm>


More information about the Equest-users mailing list