[Equest-users] [Bldg-sim] District Thermal Energy - LEED v3

Scott, Kendra L. KENDRA.L.SCOTT at saic.com
Mon Apr 5 08:47:18 PDT 2010


Does anyone know how the USGBC is going to treat the delta-EAc1 point
difference between the Stand-Alone and Aggregate scenarios will be in
LEED 2009?  Our assumption was that more points should be available
seeing how 4 points under NC 2.2 corresponded to 14% energy cost savings
and that same 14% savings under LEED 2009 is actually worth 7 points.

 

Kendra L. Scott, LEED AP

Senior Engineer

Energy Efficiency and Demand Response Programs

________________________________

Office  315.437.1869x207   Fax 315.437.1866 
6390 Fly Road, East Syracuse, NY  13057 

________________________________

 
an SAIC Company

rwbeck.com <http://rwbeck.com/> 
Please consider the environment before printing this email.
This communication and any related verbal communication are provided
under the terms of R. W. Beck's contract with its client, and are not
intended to be used or relied upon by any third party other than
advisors or consultants to the client. Any use of such communication by
any other third party is the responsibility of such third party, and R.
W. Beck accepts no responsibility for any damages incurred by any third
party as a result of decisions or actions based on such communication.
Any guidance or opinions provided herein should only be read and relied
upon by client within the limitations and context of any prior guidance
provided by R. W. Beck in any prior work products relating to the
subject matter of such communication. 

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Yuvaraj
Saravanan
Sent: Friday, April 02, 2010 7:50 PM
To: David S Eldridge; bldg-sim at lists.onebuilding.org;
Heather.Hardie-Hill at CH2M.com; AndrewC at InterfaceEng.Com;
equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] [Bldg-sim] District Thermal Energy - LEED v3

 

Not to complicate the subject. One additional question in this subject.

 

This project is in California. Another USGBC guideline states that
Title 24 - 2005 is equivalent to ASHRAE 90.1-2004. LEED V3 also allows
to use a Title 24 as baseline. So, if I want to use Title - 24 as my
baseline for the LEED purpose (to avoid additional modeling) how do I do
that? USGBC guideline  for DES "Required Treatment of District Thermal
Energy in LEED-NC version 2.2 and LEED for Schools" primarily talks
about ASHRAE 90.1 in the step 2 when changing systems. Any suggestion is
greatly appreciated.

Regards,

Yuvaraj

 

 

From: bldg-sim-bounces at lists.onebuilding.org
[mailto:bldg-sim-bounces at lists.onebuilding.org] On Behalf Of David S
Eldridge
Sent: Friday, April 02, 2010 3:41 PM
To: bldg-sim at lists.onebuilding.org
Subject: Re: [Bldg-sim] District Thermal Energy - LEED v3

 

I gave a presentation on this subject in November and the v3 equivalent
document was "coming any day now" back then - I haven't seen it yet,
although I'm pretty sure someone is working very hard on generating one.
I haven't looked for it since then either.  If not, you can probably use
the current Reference Guide along with the 2.2 DES document.

 

At the time, there was this post from Gail Hampsmire...

 

http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/2009-Oct
ober/020350.html

 

...suggesting you make adjustments for EAP2, etc.  I would assume this
includes substitution of the current energy codes for the prior ones
when referring to your registered project.  I'm not sure if there will
be other major changes to how the comparisons are structured, or changes
in the default DES efficiencies.

 

Also, will the DES plant be included with one of the three
certifications?  Then at least you may only have to guess for two of the
projects!

 

David

 

 


 

David S. Eldridge, Jr., P.E., LEED AP BD+C, BEMP, HBDP

Project Manager

 

Direct: (847) 316-9224 | Fax: (847) 328-4550

http://www.grummanbutkus.com

 

Grumman/Butkus Associates | 820 Davis Street, Suite 300 | Evanston, IL
60201

Energy Efficiency Consultants and Sustainable Design Engineers

 


 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Yuvaraj
Saravanan
Sent: Friday, April 02, 2010 5:21 PM
To: bldg-sim at lists.onebuilding.org; equest-users at lists.onebuilding.org
Subject: [Equest-users] District Thermal Energy - LEED v3

 

I am trying to do energy model for 3 buildings in a campus. Each
building is seeking separate LEED certification. We have a new central
plant with Ice storage which will serve all three buildings. I have a
USGBC guideline  "Required Treatment of District Thermal Energy

in LEED-NC version 2.2 and LEED for Schools" dated May 28, 2008, which
discusses about how to carry out the energy modeling. I am wondering is
there a similar document for LEED version 3. If there is no such
document released by USGBC for version 3, then if I follow the
aforementioned document, the problem I have is, it reference everything
back to ASHRAE 90.1-2004 but LEED V3 follows 90.1-2007. Can anyone guide
me how to approach this situation?

 

Thanks,

Yuvaraj

 
____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100405/577df2e0/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1288 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100405/577df2e0/attachment.jpeg>


More information about the Equest-users mailing list