[Equest-users] Equest Error - Please Help

[Wilson, Luke]

Thanks Heath. It seems that I still have to learn some of the tricks of equest.

From: Heath Baxa [mailto:Heath.Baxa at me-engineers.com]
Sent: Monday, April 05, 2010 9:04 AM
To: Bruce Easterbrook; Wilson, Luke
Cc: equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] Equest Error - Please Help

I'm running eQUEST successfully on Win 7, 64bit machine. ( No major problems with crashing, anyway.)

I get the "An invalid argument was encountered" when opening all eQUEST files through eQUEST.  Once I get the error, I select OK and then open the file again and all works well.  I also have problems with the running the Wizard Rulelist in certain parametric runs upon entering the Detailed Edit Mode.  This is solved by re-installing the program and then all works well.  I think this happens after creating new parametrics, but I'm not sure.  After creating all parametrics and re-installing eQUEST, it seems to work well.  Finally,  I have problems with the display driver but that may be another problem with my computer.

Heath Baxa, P.E., LEED AP



From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Bruce Easterbrook
Sent: Monday, April 05, 2010 8:47 AM
To: Wilson, Luke
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Equest Error - Please Help

Hi Luke,
I'm running it on Win 7 with compatibility mode set for XP SP3, runs fine.  It is a 32 bit program.  Win 7 has it installed in the x86 area of program files.
Bruce
Abode Engineering

On 05/04/2010 08:02 AM, Wilson, Luke wrote:
Thanks to everyone for replying! I have looked at the bdl file (no errors), I have also uninstalled and reinstalled (no difference). I am running equest on a 64bit machine, so maybe that is the problem. Is anyone running equest on a 64bit machine successfully?
Luke

From: Thomas Serra [mailto:tserra at emoenergy.com]
Sent: Friday, April 02, 2010 11:22 AM
To: Wilson, Luke; equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: RE: [Equest-users] Equest Error - Please Help

If this is a new installation I would suggest downloading the software again and reinstalling.

Thomas Serra
Project Manager
EMO Energy Solutions, LLC
3141 Fairview Park Drive, Suite 450
Falls Church, VA 22042
voice 703-205-0445 ex-113
fax 703-205-0449

From: Wilson, Luke [mailto:LWilson at integral-group.net]
Sent: Thursday, April 01, 2010 4:20 PM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: [Equest-users] Equest Error - Please Help

Equesters,

I am having a lot of trouble with Equest crashing. When I exit the wizards after reentering them or when I try to run a parametric simulation I keep getting the "An invalid argument was encountered" warning and then it crashes. I tried creating a simple test model and it was having the same issues.

Apologies for reposting, but I am getting really frustrated with my models.

If anyone could give me any guidance I would really appreciate it.

* Please note our new contact information and operating entity *

Luke Wilson, EIT, LEED AP BD+C


3005 Carrington Mill Blvd., Suite 550, Morrisville, NC 27560
t: 919.597.7931    f: 919.433.5301    e: lwilson at integral-group.net<mailto:lwilson at integral-group.net>    www.integral-group.net<http://www.integral-group.net/>

Integral Group.  Deep green engineering.

This email and any files transmitted with it are confidential and intended solely for the addressee.  If you are not the named addressee you should not disseminate, distribute, copy, or alter this email.

Please consider the environment before printing this email.






_______________________________________________

Equest-users mailing list

http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org

To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100405/c7fc71cd/attachment.htm>