[Equest-users] District Thermal Energy - LEED v3

[Heather.Hardie-Hill at CH2M.com]

Yuvaraj,
    As far as I know they have not released a new document specifically for LEED v3. I would assume that you can use the document you have listed below, reference ASHRAE 90.1-2007 (not 2004), and include a note about the assumption in your EAc1 narrative.


Heather Hardie-Hill

CH2M HILL

Industrial & Advanced Technologies

2020 SW Fourth Ave

Portland, OR 97201




________________________________
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Yuvaraj Saravanan
Sent: Friday, April 02, 2010 3:21 PM
To: bldg-sim at lists.onebuilding.org; equest-users at lists.onebuilding.org
Subject: [Equest-users] District Thermal Energy - LEED v3

I am trying to do energy model for 3 buildings in a campus. Each building is seeking separate LEED certification. We have a new central plant with Ice storage which will serve all three buildings. I have a USGBC guideline  "Required Treatment of District Thermal Energy
in LEED-NC version 2.2 and LEED for Schools" dated May 28, 2008, which discusses about how to carry out the energy modeling. I am wondering is there a similar document for LEED version 3. If there is no such document released by USGBC for version 3, then if I follow the aforementioned document, the problem I have is, it reference everything back to ASHRAE 90.1-2004 but LEED V3 follows 90.1-2007. Can anyone guide me how to approach this situation?

Thanks,
Yuvaraj


____________________________________________________________
Electronic mail messages entering and leaving Arup  business
systems are scanned for acceptability of content and viruses

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100402/16957d66/attachment.htm>