[Equest-users] cool control - temperature reset

[Ana N.]

Dear e-quest users, 
 
I tried to make a very simple change in supply air temperature control, but obviously it is not working right.  Cool control in Wizard was set to Constant and I want to change it to Reset based on outdoor air temperature in DD mode. I created cool reset schedules, set the cool control to reset and assigned cool reset schedules. However, instead of getting lower energy consumption, I have bigger cooling compared to constant control. I got the same results with another file. Basically, if I set the cool control in Wizard to reset, run the file, I get smaller cooling energy compared to constant control, which is what I expect to see. However, if I create schedules in DD, and set control to reset (the file was created with constant control in wizard) I get higher cooling energy consumption. What am I missing here? 
 
Thanks for your suggestions.
 
Ana 		 	   		  
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100402/abf5510f/attachment.htm>