[Equest-users] Loop to loop heat pump

[Madhav Munshi]

Hi Jim,

You might need to add a ground loop heat exchanger to your lake/ well loop.

Madhav Munshi
Atelier Ten

On Wed, Sep 30, 2009 at 10:09 AM, Crockett, Jim <Jcrockett at nexant.com>wrote:

>  Hello all,
>
> I’ve created a Loop-to-Loop Heat Pump.  This type of chiller requires a
> heat sink / lake for the condensing water loop.  When I run the simulation,
> I get the error:
>
>
>
> “Lake loop has no attached primary heating equipment.”
>
>
>
> At the risk sounding ignorant, how do I attach primary heating equipment?
> (I’ve tried what I think are the obvious solutions)  Thanks,
>
>
>
>
>
>
>
> Jim Crockett, P.E.
>
>
>
> Senior Project Engineer
>
> Energy & Carbon Management
>
> Nexant, Inc.
>
> 4021 S. 700 E., Suite 250
>
> Salt Lake City, Utah 84107
>
>
>
> (801) 639-5603 - phone
>
> (801) 266-4786 - fax
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
regards

Madhav
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090930/977c41e6/attachment.htm>