[Equest-users] Ductless split dx

[Bishop, Bill]

Lars,
I use PTAC and set my OA to zero.
Bill
 
William Bishop, EIT, LEED(r) AP | Pathfinder Engineers & Architects LLP
Mechanical Engineer
 
134 South Fitzhugh Street
Rochester, NY 14608
T: (585) 325-6004 Ext. 114
F: (585) 325-6005
wbishop at pathfinder-ea.com
www.pathfinder-ea.com
P Please strive to live sustainably.
________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Lars
Fetzek
Sent: Monday, September 21, 2009 10:33 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Ductless split dx
 
eQuesters,
 
    I've seen the list of HVAC airside system types available per
DOE2-2, but don't see a ductless split dx type, such as used for cooling
my unventilated elevator equipment room.  What is the accepted way to
model this simple system?
    Thanks, as usual.
 
Lars Fetzek, EI
Phoenix Engineering Group
Tampa, Florida
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090921/4f6571d7/attachment.htm>