[Equest-users] SUPPLY-CFM smaller than the total specified ZONE EXHAUST-CFM ERROR

[Shane Newman]

Try setting the supply CFM to auto size.

Shane Newman, PE, LEED AP
mechanical project engineer

M-E Engineers, Inc.
10055 west 43rd avenue
wheat ridge, co 80033

office:  303.421.6655
direct:  303.820.5185
shane.newman at me-engineers.com


The information transmitted is intended only for the person or entity to which it is addressed and contains information confidential and proprietary to M-E Engineers, Inc. and its affiliates.  Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is strictly prohibited.  If you received this in error, please contact the sender and delete the material immediately.

-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of shahram at admenergy.com
Sent: Monday, October 19, 2009 2:26 PM
To: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] SUPPLY-CFM smaller than the total specified ZONE EXHAUST-CFM ERROR

Hello:

Iam trying to simulate a Lab building with VAV system, Exchaut Fans and 
100% OA and getting the ERROR Message:

"has a specified SUPPLY-CFM smaller than the total specified ZONE 
EXHAUST-CFM"

I am specifying the same suppley cfm for exhaust cfm for each zone.

Thanks,



_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG