[Equest-users] W-W HP

[Adee Gabriel]

Hi,

 

I am trying to model a school with 2pipe active chilled beam using
Ground source heat DOAS as primary air source , water to water ground
source heat pump units to produce chilled water and cold water to
chilled beams. The ground source loop serves the DOAS, W-W HP and water
to Air ground source heat pump units.

 

I had created a dummy building for the DOAS system and used the fan coil
unit for chilled beam and zero out the fan horse power. Is this an
acceptable way of doing chilled beams?

 

Also, I wonder if anyone  had been successful in  modeling   W-W ground
source heat pumps?

 

Thanks,

Adee

 

 

Adora M. Gabriel, P.E., LEED AP

 

Silver Petrucelli + Asscociates

3190 Whitney Avenue

Hamden CT 06518

Tel: (203) 230 9007 x 226

Fax: (203) 2308247

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091019/4496cf9d/attachment.htm>