[Equest-users] (no subject)

[John Aulbach]

Chris:
 
Forgive me if I misunderstand you. eQuest can certainly model a single room, a group of rooms, a whole building or, for those with deep pockets funding, an entire college campus with hundreds of buildings.
 
You certainly just model lab hood VAV within a single room or set of rooms.

--- On Tue, 10/13/09, Clark, Chris <cclark at aeieng.com> wrote:


From: Clark, Chris <cclark at aeieng.com>
Subject: [Equest-users] (no subject)
To: equest-users at lists.onebuilding.org
Date: Tuesday, October 13, 2009, 5:47 PM








I built a model using Energy Pro 5 but have found the program unable to model VAV fume hoods.
I would like to model only the Labs in the building using eQUEST.  
Does eQUEST allow one to model part of a building only? If so how would
I build the model?
Thanks,
 




CHRIS CLARK 
EIT, LEED® AP
PLUMBING ENGINEER 

 

AEI | AFFILIATED ENGINEERS, INC.  
2700 Ygnacio Valley Rd. | Ste 170 | Walnut Creek, CA 94598

P: 925.933.8400 | Ext. 125   
cclark at aeieng.com  |  www.aeieng.com  
ü Please consider the environment before printing this message. 
 
 
 
 
-----Inline Attachment Follows-----


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091013/f4426a0c/attachment.htm>