[Equest-users] Ground-loop HX Error
Zareh, Hassan
Hassan.Zareh at stantec.com
Wed Oct 7 12:28:03 PDT 2009
Colleen,
eQuest doesn't auto size the GSHX. You should define the specification
of the borefield.
Hassan
________________________________
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Colleen
Nelson
Sent: Wednesday, October 07, 2009 3:16 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Ground-loop HX Error
I receive the following error message when attempting to run simulation:
Ground-loop HX: GLHX (VertWell-CM) is undersized for
the load and is producing an extreme temperature of -31F.
I allowed eQUEST to auto-size the GSHP equipment.
Any help is appreciated.
Colleen Nelson, LEED-AP
Mechanical Engineering
Michaud Cooley Erickson
612.673.6995
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091007/e8912435/attachment.htm>
More information about the Equest-users
mailing list