[Equest-users] Ice Rink

[Oleksandra Onisko]

Hello eQuest users,

I am trying to model an ice rink. I have everything set up and I'm getting an RS-I report which shows the loads on the ice rink. I can see the gross loads but none of them seem to be transferring to the brine. The load on the brine, the brine loop and the brine chiller are all zero. Any suggestions?

Thanks,

Oleksandra Onisko LEED AP
EIT

MCW Consultants Ltd. <http://www.mcw.com/>
600-156 Front Street West
Toronto, ON M5J 2L6
Phone 416-598-2920
Fax 416-598-5394

This e-mail may be privileged and confidential. Any unauthorized use is strictly prohibited. If you received this e-mail in error, please contact the sender directly.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091005/7f058bc0/attachment.htm>