[Equest-users] screen capture/ toolbar

[Nick Caton]

Yep.

 

Here's the play-by-play (for Windows XP users):

 

·         Navigate to the view you want

·         Press either

o   PrtScrn - to get an image of your entire screen, or

o   Alt+PrtScrn - To get an image of the currently active window/dialog

·         Open Paint:

o   Start à All Programs à Accessories à Paint

o   How I do it:

§  Press the Windows key + r to get the run dialog

§  Type MSPAINT

§  Press enter

·         Ctrl+V to paste

·         Optionally trim the image by

o   Dragging the selection up and/or left immediately after pasting, then

o   Clicking outside the selection and finding the pick box at the bottom right corner to pull in the right and bottom edges

·         Optionally mark up the image by playing with the text/line/oval tools

·         File à Save As...

·         Choose *.jpg since these onebuilding.org's mailing lists choke up with some larger formats (like Paint's default *.bmp)

·         Examine the resulting file as there will be some loss in quality by choosing a compressed format

·         Post away!

 

 

 

 

NICK CATON, E.I.T.

PROJECT ENGINEER

25501 west valley parkway

olathe ks 66061

direct 913 344.0036

fax 913 345.0617

Check out our new web-site @ www.smithboucher.com 

 

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Umesh Atre
Sent: Thursday, November 19, 2009 11:44 AM
To: jeff at sharpenotes.com; eQuest Forum
Subject: Re: [Equest-users] screen capture/ toolbar

 

Just toggle between the main tabs, for example click on the 'Internal Loads' or 'Air-Side HVAC', and when you come back to the 3D screen,

the toolbar should be back. This has worked for me, though there might actually be a tool somehere also.

Sometimes your entire 3D model might disappear, and the solution would be the same as above.

Shutting down the program and restarting also works. No need to reinstall though.

 

Screen captures are usually done using the PrintScreen command on your keyboard.

 

 

 

 

 

________________________________

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of jeff at sharpenotes.com
Sent: Thursday, November 19, 2009 12:17 PM
To: eQuest Forum
Subject: [Equest-users] screen capture/ toolbar

Greetings all,

I x'd out (closed) the small toolbar that floats within the 3-d view screen, and am not able to get it back. 

Is there an easier way than reinstalling the whole program?

 

Also, I appreciate the screen captures you all share in this forum, how do you get those?

 

Thanks in advance!

J# 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091119/46aa9e33/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091119/46aa9e33/attachment.jpeg>