[Equest-users] Programming

[Grando, John]

Hello All,

I have been working extensively with eQUEST and I would like to broaden my skills.  I noticed that there is the ability to write programming code directly into the .inp file like the example below.  I have looked in the dictionary and found the meaning of codewords such as #RV and #L, but I was wondering if there is any more in-depth material on this subject.  Thank you for your time.

SET-DEFAULT FOR SYSTEM
   TYPE = FC
   SUPPLY-KW/FLOW   =
{if (#RV(#L("SUPPLY-STATIC")) > 0)
    then 0.00007  else unused  endif}
   ..



John Grando LEED AP






NOTICE OF CONFIDENTIALITY

This E-mail message and its attachments (if any) are intended solely for the use of the addressees hereof.  In addition, this message and the attachments (if any) may contain information that is confidential, privileged and exempt from disclosure under applicable law.  If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission.  Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege.  If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091117/68777e79/attachment.htm>