[Equest-users] Adjacent Shells

[Rocha, Sheri]

I am modeling a building with multiple wall types therefore I have 3 shells per floor.  I am trying to figure out how to have the adjacent walls between shells be modeled as interior instead of exterior.  In one of spot they came out as interior, but I am not sure how I did it.  I am trying to do as much in the wizard as possible.   Does anyone know how to do this??

Thanks for your help.

Sheri Rocha, P.E. , LEEDTM AP
Senior Mechanical Engineer
srocha at mkkeng.com<mailto:srocha at mkkeng.com>
www.mkkeng.com<http://www.mkkeng.com>
P Save a Tree.  Don't print this e-mail unless necessary.

[cid:image001.png at 01CA62B3.A1AC1D80]
7600 E. Orchard Road
Suite 250-S
Greenwood Village, CO.  80111
Direct: 303-796-6062
Main: 303-796-6000
Fax: 303-796-6099

CONFIDENTIALITY NOTICE: This e-mail and any attached file(s) are intended only for the use of the individual or entity to whom or to which it is addressed and may contain information that is privileged, confidential, proprietary, and trade secret. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or reproduction of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately and discard the original message and any attachment(s).

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091111/f9da3cb8/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 11382 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091111/f9da3cb8/attachment.png>