[Equest-users] System Reports

[Oleksandra Onisko]

Hi All,

I am looking at the simulation output reports, specifically at the SS-A: System Loads Summary and SV-A System Design Parameters.  The peak heating and cooling loads are shown in the SS-A report and the system capacities are shown in the SV-A report. The SV-A report shows the heating capacity being equal to the cooling capacity which does not match the SS-A report and does not seems right.  Any ideas about this? I am looking at PVVT systems.

Thanks,

Oleksandra Onisko LEED AP
EIT

MCW Consultants Ltd. <http://www.mcw.com/>
600-156 Front Street West
Toronto, ON M5J 2L6
Phone 416-598-2920
Fax 416-598-5394

This e-mail may be privileged and confidential. Any unauthorized use is strictly prohibited. If you received this e-mail in error, please contact the sender directly.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091104/23b253df/attachment.htm>