[Equest-users] Modeling cast iron radiators

[Grando, John]

Brian,

Under the airside systems, click on your zones that have the radiators and click the heating tab.  You may want to change the baseboard control type from outside air reset to temperature.


John Grando LEED AP
________________________________
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Brian Gregory
Sent: Monday, June 29, 2009 1:51 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Modeling cast iron radiators

Hello,

I'm modeling a building heated completely by cast iron radiators.  I've tried modeling the system with hot water baseboard heating and I'm getting astronomical unmet heating hours.
Has anyone modeled this type of building successfully? (and if so could you point me in the right direction?)

Thanks,

Brian Gregory
Controls Engineer

Dynamix Engineering, Ltd.
1108 City Park Avenue, 3rd Floor
Columbus, OH  43206
614-443-1178 ext 278


From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Muldoon, Kevin
Sent: Monday, June 29, 2009 11:15 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] (no subject)

kmuldoon at ameresco.com

Kevin Muldoon
Mechanical Engineering Co-op
[cid:753575517 at 29062009-18C8]
9000 Wessex Place Suite #304
Louisville, Kentucky 40222
502 420 1980 P
502 420 1998 F
502 552 5930 C


        **************************************************************************************

NOTE: This e-mail may contain PRIVILEGED and CONFIDENTIAL information and is intended only for the use of the specific individual(s) to which it is addressed. If you are not an intended recipient of this e-mail, you are hereby notified that any unauthorized use, dissemination or copying of this e-mail or the information contained in it or attached to it is strictly prohibited. If you have received this e-mail in error, please delete it and immediately notify the person named above by reply e-mail. Thank you.

        **************************************************************************************




NOTICE OF CONFIDENTIALITY

This E-mail message and its attachments (if any) are intended solely for the use of the addressees hereof.  In addition, this message and the attachments (if any) may contain information that is confidential, privileged and exempt from disclosure under applicable law.  If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission.  Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege.  If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090629/d8da5857/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2452 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090629/d8da5857/attachment.jpg>