[Equest-users] Error - Exceeded Maximum for This Item

[Kendra Tupper]

There is a maximum thickness for wall constructions that you cannot exceed
in eQUEST - I think its about 2 ft. This could be causing the error. There's
also a maximum allowable number of zones and surfaces that you may be
exceeding.


Kendra Tupper, PE, LEED AP
Senior Consultant
Built Environment Team

Rocky Mountain Institute  |  T  303-567-8641 |  F  303-245-7213  |
www.rmi.org


On Fri, Jun 26, 2009 at 12:16 PM, Aswan Ali <aswan.ali at hurleypalmerflatt.com
> wrote:

>  Hi all,
>
>
>
> Any idea what these errors mean and how to fix them?
>
>
>
> Many thanks for your help.
>
>
>
> Aswan
>
>
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090626/8ebb5524/attachment.htm>