[Equest-users] Error

[Aswan Ali]

Hi all,

 

I'm modelling two 35-story towers in the same model. eQuest has become
very slow and tends to crash whenever I make any changes, even minor
ones. When I try to exit the Wizard to save those changes eQuest crashes
and this msg pops up.

 

 

 

Does anyone know what's causing this problem and how it can be fixed?

 

I still have about 4 floors to model and the building envelop to finish
before I can switch to Detailed Mode. 

 

I was wondering if it's possible to model the 2 towers as two separate
buildings then combine into one at the end by importing the .INP files.
Would this work? 

 

Any advice and suggestions are greatly appreciated.

 

Kind regards,

 

Aswan

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090624/dcb33578/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 6971 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090624/dcb33578/attachment.jpeg>