[Equest-users] Wall Parameters

[Steve Mignogna]

Tuan-

Once you build a Wall Parameter you have you click on the Wall Construction
that you want to apply this parameter to. See the attached image for the
location of the Wall Parameter selection.

Steve Mignogna



On Fri, May 29, 2009 at 4:46 PM, Tuan Le <tuanle at mcclure-engineering.com>wrote:

>  What associates with the Wall Parameters in eQUEST? The program allows
> you to create wall parameters but I cannot see where you connect that
> information to. I have looked through the properties of Construction,
> Layers, Materials, Exterior Walls, Interior Walls, and Spaces, but have not
> been able to find a link. What am I overlooking?
>
>  A. Tuan Le, E.I.T.
> Design Engineer
> *McClure Engineering, Inc*.
>
> *"Each problem that I solved became a rule which served afterwards to
> solve other problems." - Rene Descartes*
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Steve Mignogna
Atelier Ten
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090603/d37355ef/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: wall parameter.jpg
Type: image/jpeg
Size: 99350 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090603/d37355ef/attachment.jpg>