[Equest-users] Exhaust Air - Heat Recovery Chiller

[Jeremy McClanathan]

Does anyone know whether or not EQUEST can be used to model a heat recovery chiller that is used to recover heat from an exhaust air stream?  The system I am attempting to model will have a heat recovery chiller that pulls heat from heat recovery coils (essentially CHW coils) located in the exhaust air stream and rejects the heat to a hot water loop serving terminal unit HW coils.  Is this possible?

At first glance, it would appear that the Loop-to-Loop Heat Pump would work.  And it may work, but it appears that the use of Loop-to-Loop Heat Pump would require that a CHW loop be created and somehow attached to a cooling coil located in the exhaust air stream.  This is exactly what the real system will be, but I have not been able to figure how to attach a CHW loop to the exhaust air stream in EQUEST.

Any help would be greatly appreciated!

Jeremy

This email message, including any attachments, is for the sole use of the intended recipient and may contain confidential, proprietary, and/or privileged information, as well as content subject to copyright and other intellectual laws.  If you are not the intended recipient, you may not disclose, use, copy, or distribute the email message or its attachments.  If you believe you have received this email message in error, please contact the sender by reply email, immediately delete this email and destroy copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090602/5b87186b/attachment.htm>